Monday, February 29, 2016

Another DIY artpiece

Alright, see that orange painting on the left?  I bought that piece at a thrift shop.  I didn't love the subject which is a somewhat abstract cityscape with a large sun/moon.  I did like the size and that it was framed.  Now a year later I have a chance to spruce it up.  I was part of a girl's getaway with nine other friends over the weekend and I decided this would be my project.

So my inspirations were ideas I saw on Pinterest  (yes again) that revamped old paintings using a stencil.  Ideally your first painting has some good color to it because that is the part that will show through.  However, since mine was mostly one color I had to improvise.  I applied as many colors from the quilt in the room as I could, not really in any pattern.  I knew I would be placing the stencil off center so I didn't need to cover the entire painting with color.  
You can barely see it in the picture above, but I cut out a stencil using clear shelf liner.  I chose to do a tree but you could really pick any shape.  I have seen geometric patterns, criss cross tape, chevrons, and even letters spelling out words or sayings.  Once the stencil was down and the frame covered with painter's tape I squeezed big blobs of paint onto the picture.  In this case I used Titanium White but it could be any color.  Using a painting knife I spread the paint thickly over ever inch.  I then spread a few dots of color horizontally. While the paint was still wet I pulled the stencil up to reveal the colors underneath.


Here is the painting in its old spot.  I think the pop of white brightens the space quit a bit.  One of the things I would have done differently would be to use painter's tape as my stencil.  While the shelf liner is sticky, it was not sticky enough to keep paint from getting under it.  Otherwise, it was a pretty easy and quick way to completely change an old painting I didn't really like.

Wednesday, September 9, 2015

Marbleized art

So I have been keeping an eye out for used bottles of nail polish at garage sales when I hit the jackpot:


This bucket contains all of these partial bottles of nail polish in SO many colors.  The main ones I am missing are yellow and green.  Lots of blues, pinks, reds whites and pinks.  Even a bright orange!

I have seen this project many times and many ways on Pinterest but here is one of my favorite bloggers, Little Green Notebook using this process to make a switchplate.  So I used this as the inspiration:



After covering the countertop with plastic, I used a disposable foil pan that I happened to have in the back of my cabinet.  I added about one inch of water and then started pouring in colors.  I used spare screws to swirl things around once all of the colors were added.


I found that there is definitely a difference between some nail polishes.  Some floated right on top, some spread out, and some sunk right to the bottom.  Once you get a good coating on the water, it is easier to control the added colors.

You do have to act fairly quickly or the polish starts to set up and won't swirl easily.  Once it is the way you want it, just lay your paper (I used watercolor paper) on top of the colors.  It will stick immediately.  Then lift the paper out and let dry.  After each one, you have to clean out the leftover color still floating on top - I just used one of the screws to scoop it all up.

Here are some of my combinations:



I don't think these look as good as some of the ones I have seen online but I definitely learned a lot and I think I could do a better job the next time.  



Monday, August 24, 2015

Pictures, pictures pictures

Well, I didn't intend to take the entire summer off from blogging, but that's how it turned out.  We had a good summer but I am ready for school to start!  We are about to list this house for short term rentals so I have been taking some pictures.  I thought I would go ahead and post them here.  There are still a number of things that need to be done before I would feel comfortable having guests stay there, but for picture purposes, things are looking pretty good.

Starting at the front of the house, the gameroom:




Den



Dining
Kitchen/Dinin

Kitchen

Master bedroom

Master
Master Bath
Master bath

Second bedroom - "Ranger Room"
Ranger Room

Third Bedroom

Third Bedroom
Shared Bathroom



Half Bath


Bunkroom
Bunkroom TV area

Bunkroom Bath

 


Outdoor/deck areas:



















Friday, May 15, 2015

Why DIY?

Be warned, this will be more of a philosophical post rather than an instructional one.



When I am asked what I "do" I usually reply with some combination of attorney, consultant and mom depending on the person I am talking to.  But if I am really trying to get to know someone, I need to fit in DIY.  It is really part of who I am.  When I describe to people that we have bought a house just outside of town that I am remodeling, the brave (or uninterested) often respond, "Why?"  with a truly astonished look on their face.  That's not easy to answer.


I spend a lot of my time and energy on this project and sometimes it seems to take over my life.  Sometimes it even takes on a "crisis" mode which causes a good deal of stress.  But I think, generally, this is a rewarding way to spend my time.  About 7 years ago I left a full time office job wondering what it was like to make your own schedule.  Consulting has allowed me to do that, but I needed to find something to fill all the extra time (time I used to spend chatting with friends at work, sitting in unnecessary meetings and planning for the hours I had away from the office).  In the last seven years my kids have moved from elementary to high school/middle school so they now take much less of my attention.  Now I am basically a chauffeur/counselor.  When we bought this house it was so exciting to have a new project!  Every room needed attention - my dream house (crazy!)

So, as you can see in the last 60 posts, we have been knocking out rooms one by one.  My husband is a willing participant but I don't think it is quite as rewarding to him.  I am driven to get the house to a certain point, which is almost here.  After finishing the current bathroom projects, we will really only have the kitchen to do.  I am ready for a break, so we will likely wait a while for that.  Given that the end of my project it coming I decided to try to really address the question, "Why DIY?"

It is a complex question so let me break it into pieces.  The first, most obvious reason:  moolah, greenbacks, dough, coin, scratch.  I am cheap by nature.  Even when I have money to spend I need to feel that it was spent for something of equal or greater value.  If you have ever gotten a quote from a remodeling contractor and been shocked, you might have tried a DIY.  This financial necessity was certainly a big driver early in our marriage.  If you DIY, you can spend more on the materials and get more done.  That appeals to my frugality.

But then there is quality of work.  A poor quality DIY can be a waste of good materials and actually bring down the value.  On the other hand, I would rather have a poor quality DIY that I know how to repair than paying a contractor more to do an equally poor job.  I have not been impressed with many of the tradesmen I have hired in the past.  It is hard to find good help.  My cheapness works against me here because I probably don't consider the contractors who will provide the best quality work.  I have become more skilled at certain jobs as I have completed projects so my quality of work has improved over the years.  Also, the advent of Youtube has greatly increased my ability to research a project first.  I now feel that the quality of our DIY surpasses some of the tradesmen out there.  In the end, I would rather look at a mistake that I made than a mistake that I paid someone to make.

Control.  This has probably become my number one reason for DIY.  If you are present and participating in every phase of a project, you get to make the decisions about unexpected issues.  I can't tell you how many times we have changed plans in the middle of a project, which contractors HATE by the way.  Plus, with a contractor, things move so quickly you really don't have time to change plans.  It sounds funny, but at our slower DIY pace, I think we end up with a better layout/design because of changes along the way to make it better.  Even when I hire out a small part of a project, like plumbing recently, I am always disappointed by some unexpected decision that the workers make. You guessed it, I am a control freak.

And then there is pride.  I like to be able to say that I built this, or created that.  I love the feeling when I talk to men (mostly) who assume I don't know squat about construction, when start to recognize that I actually understand what we are talking about.  This is really just a fleeting feeling though, and not worth the work and headache of DIY.

Recycling also plays a role here.  I do not like to throw things away, as my husband will attest.  I get such a good feeling when something I have saved becomes a useful and unique design element in a new project.  If I ever decided to go into another career, this would probably be one of my passions I would look to. It makes me happy that recycling is good for the environment but I would be fooling myself if I thought that was the main driver.  It is a combination of problem solving and eliminating waste, and it feels like putting in that last piece of a puzzle to my crazy brain.

However, I do not want to be a contractor.  So many of my friends tell me that I should remodel other people's houses for a living.  The closest I could come to this would be to flip houses.  I have zero interest in working with a client to bring their vision to life.  This is all about ME!  Despite the fact that I do electrical, install tile, do construction, etc, those are NOT my desired professions.  Doing the actual work is hard on your body and I don't think you could pay me enough to go into any of those fields.  No, I only work for myself.  If I was doing it for money, I think all the joy would disappear.

Finally, I think DIY is in my genes.  My dad did everything himself as long as I can remember.  As a child, we had a garage full of lawn mowers being used for parts for our working mower.  We had an old 50's truck that was taken apart, waiting to be rejuvenated.  Growing up, we never hired out work.  When something needed to be done you figured out how to do it.  So that is just my natural first thought when a project presents itself.  When my dad remarried, my stepmother loved to redecorate so his skills became focused on house projects.  As I grew older and married, this became a bonding topic that we discussed often.  My dad passed away too young seven years ago and I still miss him.  But I like to imagine him checking out my projects and my blog.

So that is why I DIY.  Why do you?


Wednesday, May 13, 2015

Last tile!


OMG I am so tired of tiling!  It seems like this shower has taken forever to finish.  Since this is a neo-angle shower, there are a LOT of cuts.  In square footage, the shower is about the same size as our master shower.  However, the amount of work seemed to double.  Here is a shot before the wall tile was started.

I worked on the wall containing the plumbing first so we could go ahead and have the plumbers come to install all the fixtures.  That seemed to go fairly quickly.  The layer of accent tile required time to dry before stacking any tile on top of it.  That made for a multi-phase process...




The other thing that took a long time was tiling around the window.  Since I used porcelain tile I wasn't sure what to do where the edges of the tile show.  Eventually I figured out that I needed to use a "factory edge" for areas where it would show.  These tile are essentially the same color throughout.







Then these doorway pieces took even more time.  Wherever there was a 135 degree angle I had to miter the edges of the tile so they would sit flush.




It seemed like it would never happen, but I placed the final tile this afternoon!  I still have to grout and clean up the messy spots.  But I feel like I passed a great milestone today.

Sunday, May 3, 2015

Shower is in operation





Woohoo!  We have a functional shower!  The only real thing we lacked in this bathroom was something to keep the water in the shower.  Installing a shower door is not a super easy DIY but it is definitely doable.  I have installed several over the years and the hardest parts are always making the holes in the tile and cutting the metal bars to the right length.  My best advice is to read the directions several times and to practice fit the pieces before making any cuts.  I am not sure what you would do if you ended up messing up a piece (other than buying another set.)


5/16 in. Diamond Plus Mini Hole SawAs for cutting holes in the tile, the best bit is one of these.  It is a diamond bit hole saw.  Most of those other bits saying they are for tile and glass will take forever and wear out after a couple of holes.  For this set I needed 8 holes.  It probably took a full 5 - 10 minutes of drilling for each hole.  To get started I had to hold the bit between my fingers to keep in it one place.  One you get a groove started then it is just a matter of patience.  Spray or drip water onto the bit every couple of seconds and keep the drill at half speed to avoid burning up the bit.

I had to cut 2 1/2 inches off the length of the top and bottom tracks.  The directions call for a hack saw.  That is what I have used in the past but I find it hard to get a straight, clean cut.  This time I tested a couple of other methods and found that the chop saw cut the metal just fine.  I have no idea why that isn't recommended - maybe it is bad for the saw blade?

The only other problem I had was that the package was damaged during shipping.  It was not enough damage to make me send it back, but it is annoying, especially since it was shipped to the store.  I'll be leaving a negative comment on the Home Depot website...





Anyway, I took my first shower in the bathroom.  The plumbers installed the faucet so this was the first time I tested it.  Apparently it is set so that not much hot water gets through.  I have looked up online and found out how to adjust the hot water feed, however first I will have to find the hex key that came with the faucet.  I have not seen it around so I may have to improvise.  Ugghh!  It's always something!

The last things I need to do in this bathroom are nail and caulk trim pieces, tile the backsplash,touch-up paint, and paint/install the plexiglass plates above the shower.  It feels good to be at this point!  Time for decoration.